This type of organization is reasonable, versatility, may be suitable for the needs of a variety of supporting functions, in 2SA30 box to install the motor control module (LK) can be realized in situ operation, easy to install and use and cost savings. 

 The advanced product design, complete series can fully meet the power, petrochemical, metallurgical and mining industry automation control needs. 


 2SA30 electrical device characteristics 
 1, the series is to absorb advanced technology from Siemens; 
 2, advanced design, complete series can fully meet the power, petrochemical, metallurgical, mining and other industries automation control requirements; 
 3, reasonable structure, versatility, can be adapted to the needs of a variety of supporting functions, in 2SA30 to install the motor control box (LK) local operation can be realized, 
 Easy to install and use, cost savings; 
 4, can provide more than two intermediate signal (ie, switch to the middle of signal); 
 5, with dust-proof, waterproof, and its degree of protection IP67, user requirements should also provide protection class IP68 for electrical devices; 
 6, easy adjustment, high control accuracy. 

 Technical conditions 
 1, ambient temperature: -20 ℃ ~ +80 ℃ 
 2, the working standard: S2-15min short-time work system 
 3, power: Three-phase 380V 50Hz 
 4, protection class: IP67, IP68 (special orders) 
 5, trip precision: ≤ 0.5% 
 6, torque accuracy: ≤ 10% 
 7, connecting dimensions: the implementation by GB12222 or JB2920 

 2SA30 Series switching actuator performance table 


 S-Type 
 No. 2SA3010 2SA3011 2SA3012 2SA3020 2SA3021 2SA3022 2SA3030 2SA3031 2SA3032 2SA3040 2SA3041 2SA3042 
 The most torque control 
 Large 
 Value of 30Nm 60Nm 125Nm 250Nm 500Nm 1000Nm 2000Nm 4000Nm 
 Most 
 Small 
 Value of 10Nm 20Nm 40Nm 80Nm 160Nm 315Nm 630Nm 1250Nm 
 Output 
 Speed 5-160r/min 5/40r/min 
 Flange No. GB12222 
 ISO5210 F07 F10 F14 F16 F25 F30 
 Motor 
 Work 
 15min S2 standard format 
 Class F motor three-phase asynchronous motor 
 Quality 26 27 5,054,110,115,220,235 



 2SA35 series modulating electric actuator performance table 


 R Series models 2SA3510 2SA3511 2SA3512 2SA3520 2SA3521 2SA3522 2SA3530 2SA3531 2SA3532 2SA3540 2SA3541 2SA3542 
 The most torque control 
 Large 
 Value of 20Nm 40Nm 80Nm 175Nm 350Nm 700Nm 1400Nm 2800Nm 
 Most 
 Small 
 Value of 15Nm 30Nm 60Nm 125Nm 250Nm 500Nm 1000Nm 2000Nm 
 Setting torque 15Nm 30Nm 60Nm 125Nm 250Nm 500Nm 1000Nm 2000Nm 
 Output speed 5-40 5-14 5-10 
 Flange No. GB12222 F07 F10 F14 F16 F25 F30 
 Working standard S4 system (intermittent working system, mechanical brake). S5 (intermittent working system, the brake can be charged.) 10% of the minimum duty cycle, the most by the number of operations 1200c / h. 
 Motor three phase asynchronous motor, with and without brake, insulation class F-class, with PTC thermistor element. 
 Mass (kg) 26 27 50 55 110 116 220 235 



 It should be noted 
 Wiring diagram wiring by nameplate 
 Control and power cable connections should be separately 
 To ensure protection, use the cable inlet connector threading with gasket 
 For the open-loop control, reversing contactors can be used to control the motor, motor control module installed to replace LK 
 Site in the motor control cabinet control box. 
 It should be noted: In the electric device to stop running, switching and signal part (ESM) on the anti-condensation space heater HZ charged