220V series of fine small part of the transition back to Y (Japan glorious technology) 
 Operating voltage: DC24V, DC220V, AC24V, AC110V, AC220V, AC380V 
 Output torque: 50NM, 100NM, 200NM, 400NM, 600NM, 1000NM, 2000NM, 
 Can be equipped with butterfly valves: Diameter DN25-DN700 can be equipped with ball valves: Diameter DN15-DN300 
 Superior performance of its products to the undisputed advantages in season your admiration! 
 1, powerful: intelligent, proportional, switch type, various types of signal output type everything 
 2, small size: the volume equivalent to only about 35% of similar products 
 3, light and pleasant: the weight equivalent to only about 30% of similar products 
 4, reliable performance: bearing teeth mouth parts and other key electrical components imported brand-name products 
 5, nice: aluminum die casting shell, fine and smooth, and can reduce electromagnetic interference 
 6, precision wear: the integration of special actinide worm output shaft forged alloy, high strength, wear resistance 
 7, back to the minimal difference: integration of the output shaft gear to avoid a key link in the space, high driving accuracy 
 8, security assurances: The 1500V voltage detection, F class insulation motor, safe and secure 
 9, supporting simple: single-phase power, an external circuit is extremely simple, but also can be 380V, DC 
 10, easy to use: oil-free, non-point inspection, water rust, installed at any angle 
 11, protection devices: a double limit, thermal protection, overload protection (optional) 
 12, a variety of speed: full travel time 5 seconds, 10 seconds, 15 seconds, 30 seconds, 60 seconds, 100 seconds, etc. 
 13, corrosion preventive: stand, couplings, stainless steel screws are used 
 14, Smart NC: digital set, digital tuning, a high degree of accuracy, since the diagnosis, a machine can 
 15, integrated one: a highly integrated intelligent control module electrical devices in the ontology, without an external orientation, etc. 

 Performance parameters: 


 Type Y 
 Performance of Y-5 Y-10 Y-20 Y-40 Y-60 Y-100 
 Output torque 50NM 100NM 200NM 400NM 600NM 1000NM 
 Action time 15S 30S 30S 30S 45S 60S 
 Turning angle 0-36000-3600 0-36000-900 0-9000-900 
 Motor power 20W 20W 35W 90W 90W 140W 
 Rated current 0.35A 0.35A 0.37A 0.69A 0.6A 0.9A 
 Weight 2.5kg 2.5kg 8kg 8.5kg 8.5kg 10kg 
 Power AC 220V ± 10% 50HZ/60HZ 
 Insulation resistance 100MΩ/500VDC 
 1500VAC 1 分钟 pressure rating 
 Protection class IP68 (equivalent to getting the product to 20M deep water without leakage) 
 ● Electric operation limit components: full full off the limit switch. 
 ● Manual operation: mechanical block. 
 Protection over-temperature protection (automatic recovery type) 
 3600 installed at any angle installation position 
 Electrical connection G1 / 2 Waterproof Cable Connector, power lines, signal lines, one each 
 Ambient temperature -30 ℃ - 60 ℃ 























 . Maintenance 
 ● Product transmission with long life and good quality pressure of molybdenum-based grease for the drive system 
 Permanently lubricated, no need to refuel. 
 ● Product installation should be run periodically to check for abnormalities. 

 2. Common Faults and Countermeasures 

 Symptom Cause Countermeasure 
 Motor does not start does not connect the power supply connected 
 Separation of terminal disconnection or repair broken, the correct terminal connections are tight 
 Low supply voltage does not check the voltage or voltage 
 Overheat protection action (the ambient temperature is too high, the valve is blocked) to reduce the ambient temperature, with the manual method to check whether the normal valve opening and closing 
 Adverse action limit switches replacement switches 
 Bad trip and then stop to adjust the adjustment 
 Open and close indicator light bulb for light does not shine 
 Limit switch replacement switch adverse action 
 Bad block re-adjustment of the adjustment